 |
 |
 |
|
Back to AEM Main Page
AEM Series-2 Plug-n-Play EMS for 1989-1995 Nissan GA16DE/KA24DE/SR20DE/SR20DET 64pin [USDM/EUDM]
AEM's Plug & Play Engine Management System (EMS) for 1989-1995 Nissan GA16DE/KA24DE/SR20DE/SR20DET 64pin [USDM/EUDM] applications is designed for racing vehicles and plugs directly into a vehicle's factory ECU harness and requires no additional wiring or hardware. Windows™ compatible software (2000, XP, NT, 98, 95, ME) makes the task of copying, viewing and manipulating data as simple as a click of the mouse. An integrated tuning wizard allows users to create a base map specifically for a car’s configuration, regardless of what type of injectors, sensors, coils or other changes have been made. The AEM EMS's infinitely adjustable software allows tuners to program virtually any combination of engine control, power adders and auxiliary devices, and accurately delivers proper amounts of fuel and correct ignition timing for any boost level or operating condition. Use the AEM EMS to have one of the most powerful engine management setups available today and make sure every aspect of your Nissan's ECU map is optimized.
Legal in California only for racing vehicles which may never be used upon a highway.
Applications supported by this part:
| Infiniti |
| Model |
Year(s) |
Trim |
Engine(s): |
| G20 |
1991-1993 |
Base |
2.0L/1998cc L4 VIN:C [SR20DE] |
| Nissan |
| Model |
Year(s) |
Trim |
Engine(s): |
| 240SX |
1989-1994 |
Base, LE, SE |
2.4L/2389cc L4 VIN:M [KA24DE] |
| Bluebird |
1989-1995 |
Base |
2.0L/1998cc L4 [SR20DET] |
| NX1600 |
1991-1993 |
SE, XE |
1.6L/1597cc L4 VIN:E [GA16DE] |
| NX2000 |
1991-1993 |
SE, XE |
2.0L/1998cc L4 VIN:G [SR20DE] |
| Pulsar GTiR |
1990-1994 |
Base |
2.0L/1998cc L4 [SR20DET] |
| Sentra |
1991-1994 |
E, GXE, Limited Edition, SE, XE |
1.6L/1597cc L4 VIN:E [GA16DE] |
| SE, SE-R |
2.0L/1998cc L4 VIN:G [SR20DE] |
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Plugs directly into the factory harness. No rewiring necessary.
- Uses all the factory sensors.
- Includes start up calibrations.
- System is fully enabled and unlocked - Never pay for upgrades!
- Context sensitive help eases tuning process.
- Maps can be password protected by the tuner to prevent unauthorized usage or sharing.
- Runs on Windows-compatible software.
- 8 peak and hold injector drivers.
- 8 direct-fire coil outputs.
- 16 general-purpose outputs.
- 8 definable switch inputs.
- 4 EGT inputs with fuel control.
- 1MB of internal data logging.
- Electronic boost control.
- Full idle control.
- Programmable traction control.
- Software definable knock control.
- Two step launch control.
- User configurable soft-cut rev limiters.
- Wet or dry nitrous control.
- Tune using new USB communication port or serial port.
- Works with all AEM gauges.
|
|
|
|
|
|
|
|
|